Lexmark E120 - Lexmark 25C0010 - X 500n Color Laser Manual

•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void
your warranty.
When printing on card stock:
•
Set the Paper Type to Card Stock.
•
Do not use card stock that is creased. It may cause paper jams.
•
We recommend the use of grain long card stock.

Lexmark E120

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Lexmark E120 supports stocks up to 163 g/m
card stock or labels.
The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder.
Overview of card stock and label support
Paper source
Tray 1
Manual feed
For paper and transparency specifications, see the Lexmark E220 Publications CD.
Media specifications
Width:
Labels
Length:
Weight:
Thickness:
Smoothness:
2
(43 lb). The automatic paper feeder can hold up to 10 sheets of
Card stock
Index Bristol
2
135–163 g/m (up to 90 lb)
2
135–163 g/m (up to 90 lb)
210–216 mm (8.3–8.5 in.)
279–297 mm (11–11.7 in.)
Up to 163 g/m
Up to 0.25 mm (0.01 in.)
100–400* Sheffield
Printer specifications
57
Paper
60–163 g/m
60–163 g/m
2
(43 lb)
Labels
Vinyl
2 —
(16–43 lb)
2
—
(16–43 lb)