Error Messages - Lexmark 22N0057 - X 5450 Color Inkjet User Manual

Error messages

Alignment problem
(tape on cartridge)
Alignment problem
(used paper)
Black Ink Low /
Color Ink Low /
Photo Ink Low
Black Cartridge
replacement
required / Color
Cartridge
replacement
required / Color and
Black Cartridge
replacement required
Cartridge Error
•
1102
•
1203
•
1204
or
•
120F
(Procedure 1)
1
Remove the print cartridge.
2
Make sure the sticker and tape have been removed.
3
Reinsert the cartridge.
4
Press to align the cartridge.
For more information, see "Aligning print cartridges" on page 91.
Load only plain, unmarked paper for aligning the cartridge.
The printer will read any markings on used paper, which could cause the alignment
error message to appear.
1
Check the indicated ink level or levels, and install a new cartridge or cartridges,
if necessary.
To order supplies, see "Ordering supplies" on page 94.
2
Press to continue.
A new cartridge needs to be installed.
If available, click the Continue button on your computer screen to print using the
remaining print cartridge. (The Continue button is available only at the beginning
of a print job.)
Note: A variable amount of ink remains in the cartridge.
Procedure 1
1
Remove the print cartridges, and close the cartridge carrier lids.
2
Disconnect the power cord from the electrical outlet.
3
Reconnect the power cord to the electrical outlet.
4
If the button is not lit, press
5
Reinsert the print cartridges.
6
If the error:
•
Does not reappear, the problem has been corrected.
•
Reappears, one of the cartridges is not working properly. Continue with
Procedure 2.
Troubleshooting
115
1 2
.