Lexmark 22N0057 - X 5450 Color Inkjet User Manual page 61

3
Press or repeatedly until Print Photos appears.
4
Press .
5
Press or repeatedly until Print DPOF Selection appears.
6
Press Start Color or Start Black.
Using a PictBridge-enabled digital camera to control printing
photos
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and
print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the camera documentation.
•
The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
•
If the PictBridge connection is successful, the following appears on the printer display: PictBridge
camera detected. Press
messages" on page 115.
3
Follow the instructions in the camera documentation to select and print photos.
Note: If the printer is turned off while the camera is connected, you must disconnect and then reconnect the camera.
to change settings. If any other message appears, see "Error
Working with photos
61