Removing Memories From A Memory Bank; Changing Memory Bank's Name - Yaesu VX-8R Operating Manual

M M
EMORY
5. To change to another Memory Bank, press the
rotate the DIAL knob to select the new Memory Bank, then press the
6. To exit from Memory Bank operation, just press the
number will be replaced by the "MR
Recall mode, without utilization of the Memory Banks. The memories stored in the
various Banks will remain in those banks. You do not need to store them again.
R M
EMOVING EMORIES FROM A
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold the
memory channel data from the Memory bank.
C M
HANGING A EMORY
You may change the default Memory Bank Names, which are shown on the display while
selecting the Memory Bank your desire.
1. Press and hold in the
2. Rotate the DIAL knob to select the Set Mode Item 8: BANK
NAME. NAME NAME NAME NAME
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the memory bank on which
you wish to change a label.
5. Press the
tag.
6. Rotate the DIAL knob, or press one of the keyboard keys,
to select the first digit of the desired label.
Example 1: Rotate the DIAL knob to select any of the 61
available characters.
Example 2: Press the
the seven available characters associated with
that key: a
7. Press the
8. Repeat steps 6 and 7 to program the remaining letters, num-
bers, or symbols of the desired label. A total of 16 charac-
ters may be used in the creation of a label.
9. If you make a mistake, press the
cursor, then re-enter the correct letter, number, or symbol.
10. When you have completed the changes of the label, press the PTT switch to save the
label and exit.
54
ODE ( R
EGULAR
M
EMORY
M
EMORY
key for 1/2 second, then press the
B N
'
ANK S AME
key for one second to enter the Set Mode.
key briefly to enable changing of the name
key repeatedly to toggle among
b c
key to move to the next character.
M C
EMORY HANNEL
B O
ANK PERATION
key, then press the
MR", and you are now in the "regular" Memory
MR MR
MR
B
ANK
8: BANK 8: BANK 8: BANK
8: BANK
A B C
key to backspace the
VX-8R O
O
PERATION
key. The Memory Bank
key to remove the
2
PERATING
)
key. Now
key again.
M
ANUAL