Removing Memories From A Memory Bank; Changing A Memory Bank's Name - Yaesu VX-8DR Operating Manual

M M
EMORY
5. To change to another Memory Bank, press the
rotate the DIAL knob to select the new Memory Bank, then press the
6. To exit from Memory Bank operation, just press the
number will be replaced by the "MR", and you are now in the "regular" Memory
Recall mode, without utilization of the Memory Banks. The memories stored in the
various Banks will remain in those banks. You do not need to store them again.
R M
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold the
memory channel data from the Memory bank.
C M
You may change the default Memory Bank Names, which are shown on the display while
selecting the Memory Bank your desire.
1. Press and hold in the
2. Rotate the DIAL knob to select the Set Mode Item 8: BANK
NAME.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the memory bank on which
you wish to change a label.
5. Press the
tag. Press and hold the
any previous name, if desired.
6. Rotate the DIAL knob, or press one of the keyboard keys,
to select the first digit of the desired label.
Example 1: Rotate the DIAL knob to select any of the 61
available characters.
Example 2: Press the
the seven available characters associated with
that key: a
7. Press the key to move to the next character, if needed.
8. Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of 16 characters may be used in the
creation of a label.
9. Press and hold the
data after the cursor that may have been previously stored.
54
ODE R
M
M
key for 1/2 second, then press the
B ' N
key for one second to enter the Set Mode.
key briefly to enable changing of the name
key for two seconds to clear
key repeatedly to toggle among
b c
key for two seconds to delete all
M C
B O
key, then press the
B
2 A B
VX-8DR O
O
key. The Memory Bank
key to remove the
C
key. Now
key again.
M