Message Filter Setting - Yaesu VX-8R Operating Manual

M F
ESSAGE ILTER
The Message filter option allows you to choose to receive only specific types of message
information.
1. Press the key several times until the APRS MESSAGE
screen appears on the display.
2. Press and hold the
GPS Set Mode.
3. Rotate the DIAL knob to select Set Mode Item 19: MSG
FILTER. FILTER FILTER FILTER FILTER
4. Press the key briefly to enable adjustment of this Set
Mode Item.
5. Press the /
utilize (G1 ALL G1 ALL or G2 CQ
G1 ALL G1 ALL G1 ALL
6. If you add a new message group code and/or bulletin group
code, select "G3 G3" ~ "G5
G3 G3
G3
~ "B3 B3" (for bulletin group code) by rotating the DIAL knob,
B3 B3
B3
then press the
and
7. Use the
then use the DIAL knob to select the desired characters/
numbers in each column. Repeat for each column to complete the message (up to 9
characters) or bulletin (up to 5 characters).
8. When you have completed your selection, press the PTT switch to save the new
setting and exit to the APRS MESSAGE screen.
VX-8R O
PERATING
R
ECEIVING AN
S
ETTING
key for one second to enter the APRS/
key to select the "Filter" you wish to
G2 CQ G2 CQ G2 CQ). G2 CQ
G5" (for message group code) or "B1
G5 G5
G5
key.
keys to navigate to each column,
M
ANUAL
APRS
APRS M
ESSAGE
19: MSG 19: MSG 19: MSG 19: MSG
B1" B1 B1
B1
O
®
PERATION
89