Stereo/Monaural Selection; Mic Gain Setting; Ptt Lock - Yaesu FTM-10R Operating Manual

You may enjoy the FM Broadcast and external audio input in stereo output.
1. Press and hold the [ VOL/SEL ] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item "F42 STEREO".
3. Press the key to enable selection of this Menu item.
4. Rotate the DIAL knob to select between "STEREO" and "MONO".
5. Press the [ VOL/SEL ] key to save the new setting and exit to normal operation.
When Stereo Audio Output is selected, an "
At the factory, a microphone gain has been programmed that should be satisfactory for the
internal microphone and optional MH-68
phone, you may wish to set a different Microphone Gain Level.
1. Press and hold the [ VOL/SEL ] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item "F19 MIC GAIN".
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired Microphone Gain Level. Available selec-
tions are MIN, LOW, NORMAL, HIGH, and MAX.
5. Press the [ VOL/SEL ] key to save the new setting and exit to normal operation.
You may also lock out the PTT key when the LOCK mode is activated.
1. Press and hold the [ VOL/SEL ] key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item "F22 PTT LOCK".
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select "ON" (Lock) or "OFF" (unlock).
Press the [ VOL/SEL ] key to save the new setting and exit to normal operation.
FTM-10R O
PERATING
M
ISCELLANEOUS
S /M
TEREO ONAURAL
MIC G
PTT L
M
ANUAL
S
ELECTION
" icon appears on the display.
S
AIN ETTING
/ MH-68 . If you us an after-market micro-
A6J B6J
OCK
S
ETTING
87