Bluetooth ® Operation - Yaesu FTM-10R Operating Manual

Bluetooth
Installation of the optional BU-1 Bluetooth
send/receive voice messages with the optional BH-1 Bluetooth
links.
Pairing
When using the Bluetooth
FTM-10R must be paired.
Bring the Bluetooth
1. Turn the transceiver off.
2. Press and hold the [ VOL/SEL ] key while turning the power on again.
3. Rotate the DIAL knob to select the Bluetooth
Main Chassis Bluetooth
Front Panel Bluetooth
4. Press the PTT key.
The default PIN code (6111) appears.
You may change the PIN code, if desired, before continu-
ing with step 5.
1. Press the PTT key, and then rotate the DIAL knob to set the first digit of the PIN
code.
2. Press the
place.
3. Repeat the previous steps to complete the PIN code. If you make a mistake, press the
key to move back to the incorrect number, then re-enter the correct number.
5. Make sure that the BH-1 is off.
6. Press and hold the power switch on the BH-1 Bluetooth
until the BH-1's indicator blinks red/blue alternately.
7. Press the PTT key on the FTM-10R to initiate the pairing.
8. If the pairing is successful (Requires a 20 to 30 seconds), "LINK OK" notation will
appear on the display. The FTM-10R will turn off and back on again.
When the BH-1 Bluetooth
BH-1's indicator will blink blue.
60
O
®
PERATION
Headset for the first time, the Bluetooth
®
Headset and the FTM-10R close together when doing Pairing.
®
Adapter Unit:
®
Menu Item "SF6 BLTH R"
Adapter Unit:
®
Menu Item "SF7 BLTH F"
key to save the first digit of the PIN code and move on to the next
Headset is correctly recognized by the FTM-10R , the
®
Adapter Unit will enable, the FTM-10R to
®
Adapter Unit you wish to pair.
®
Headset for five seconds,
®
FTM-10R O
Headset via wireless
®
Headset and the
®
M
PERATING ANUAL