Basic Operation; Receive - Yaesu FTM-10R Operating Manual

B O
ASIC
1. To turn the transceiver on, press and hold in the top panel [ POWER ] key for two sec-
onds.
When you turn the transceiver on, the applied DC voltage is displayed on the LCD for
2 seconds. Then the operating frequency will be displayed.
To turn the transceiver off, press and hold in the [ POWER ] key for two seconds.
2. Press the front panel
Key
2 m Amateur Band (H-V)
AM BC Band (AM)
m Amateur Band (H-V)
Key
2 m Amateur Band (H-V)
AM BC Band (AM)
Amateur Band (H-V)
When external audio equipment, like an iPod
required.
When external audio equipment is connected, the input audio level must be adjusted
on the external audio equipment.
H-U 430 MHz Amateur Band
H-V 144 MHz Amateur Band
GRP Group Memory
-- Audio Line
WX WX Band
AM AM BC Band
FM FM BC Band
[ VOL/SEL ] key
22
PERATION
R
/ keys to switch the operating band as follows:
430 MHz Amateur Band (H-U)
WX Band (WX)
Group Memory (GRP)
FM BC Band (FM)
ECEIVE
Audio Line
Audio Line
430 MHz Amateur Band (H-U)
, is connected, an after-market cable is
®
[ POWER ] key
/ key
FTM-10R O
FM BC Band (FM)
Group Memory (GRP)
WX Band (WX)
DIAL knob
M
PERATING
2
2 m
ANUAL