Transmitter Power Level; Deleting Memory - Yaesu FTM-10R Operating Manual

The FTM-10R enables you to set the Transmitter Power Level for each memory channel
individually.
1. Recall the memory channel on which you wish to set the Transmitter Power Level.
2. Press and hold the
mode.
3. Rotate the DIAL knob to select Menu Item "M12 TX
POWER".
4. Press the key briefly to display the current Transmitter
Power Level.
5. Rotate the DIAL knob to the select desired Transmitter Power Level ("LOW", "MID", or
"HIGH").
6. Press the [ VOL/SEL ] key to save the new setting and return to the memory recall mode.
You may delete the memorized data (except CLUB memory channel) of the FTM-10R
memories.
1. Recall the memory channel on which you wish to delete.
2. Press and hold the
mode.
3. Rotate the DIAL knob to select Menu Item "M13 DELETE".
4. Press the key briefly to display the confirmation mes-
sage ("DELETE Y") on the LCD.
If you decide to cancel the Erasure of Memory Data, press
the [ VOL/SEL ] key.
5. Press and hold the
revert to memory mode.
Note: Once deleted, the channel data can not be recovered.
FTM-10R O
PERATING
T
RANSMITTER
key for one second to enter the Memory Channel Customization
HIGH MID LOW
144 MHz 50 W
430 MHz 40 W
D
ELETING
key for one second to enter the Memory Channel Customization
key for one second. The display will
M
ANUAL
M
EMORY
P L
OWER EVEL
20 W 5 W
M
EMORY
O
PERATION
43