Table of Contents
Advertisement
Setup (Menu) Mode
Menu Selection Details
1 APO
Function: Enables/Disables the Automatic Power Off feature.
Available Values: 0.5 H to 12.0 H (0.5 H/step) / OFF
Default: OFF
2 BCLO
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON / OFF
Default: OFF
3 BEP KEY
Function: Enables/Disables the key beeper.
Available Values: KEY+SCAN / KEY / OFF
Default: KY+SCAN
KEY+SCAN: The beeper sounds when any key is pressed, or when the scanner stops.
KEY:
The beeper sounds when any key is pressed.
OFF:
Beeper is disabled.
4 BEP EDGE
Function: Enables/Disable the Band-edge beeper while scanning.
Available Values: ON / OFF
Default: OFF
5 BELL
Function: Selects the CTCSS/DCS/EPCS Bell Ringer repetitions.
Available Values: 1 TIME to 20 TIMES / CONTINUE (Continuous ringing) / OFF
Default: OFF
6 CLK TYPE
Function: Shifting of the CPU clock frequency.
Available Values: A / B
Default: A
This function is only used to move a spurious response "birdie", should it fall on a desired
frequency. Select "A" for the normal operation.
7 DC VOLT
Function: Indicates the DC Supply Voltage.
26
FTM-3100R/E Advance Manual
Advertisement
Table of Contents
