Yaesu FTM-10R Operating Manual page 91

Item
Menu Item
#
26 RPT SFT Sets the magnitude of the repeater Shift.
27 RX EXP Enables/Disables the band expansion.
28 RX F CCL Shifting of the CPU clock frequency.
29 RX M MOD Selects the receiving mode.
30 SCN CVRG Selects the Scan range.
31 SCN DRCT Select the Scan type.
32 SCN MODE Selects the Scan Resume mode.
Select the scan start direction which initiates the scanner using the
33 SCN STRT
scan command by pressing the
34 SPEAKER Select the Speaker to be used.
35 SQL BELL Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
36 SQL DCS Setting of the DCS code.
37 SQL EXP Enables/Disables split CTCSS/DCS coding.
38 SQL LEVL Set the squelch threshold level.
39 SQL TSQF Setting of the CTCSS Tone Frequency.
40 SQL TYPE Selects the Tone Encoder and/or Decoder mode.
41 STEP Setting of the synthesizer steps.
42 STEREO Select the audio output.
43 TOT Setting of the TOT time.
44 TX POWER Selects the transmit power output level.
45 VOL.ITCOM Sets the volume level of the intercom mode.
46 VOX MIC Enables/Disables VOX operation.
47 VOX SENS Sets the VOX sensitivity.
48 WIRES Enable/Disable the Internet Connection feature.
49 WX ALERT Enables/Disables the Weather Alert Scan feature.
: Depends on the band of operation.
FTM-10R O
PERATING
M
ENU
Function
key.
M
ANUAL
( "S " ) M
ET
Available Values
( Default: Bold Itaric )
0.00 ~ 99.95 MHz ( )
(50 kHz increments)
NORMAL/EXPAND
AUTO/WIDE FM/FMNARR FM/
IN BAND/HAM BAND
NORMAL/RETURN
BUSY/HOLD/TIME 3S/TIME
5S/TIME 10S
UP START/DN.START
REAR/F+R/FRONT/OFF
OFF/1T/3T/5T/8T/CONT
104 standard DCS codes (023)
SQL OFF/SQL MIN/SQL 01 ~
SQL 06/ SQL MAX
Amateur Bands: SQL 01
AM: SQL 01, FM: SQL 02
50 CTCSS Tones ( 100 Hz )
OFF/TONE ENC/TONE SQL/
REV TONE/DCS
5.00/6.25/8.33/10.00/12.50/
15.00/20.00/25.00/50.00/
100.00/200.00 kHz, AUTO
STEREO/MONO
1MIN ~ 30MIN, OFF
LOW/MID/HIGH
IVOL HI/IVOL LOW
VOX OFF/R-HAND/F-HAND/
MIN/1/2/3/4/5/6/7/8/MAX
OFF/CODE/MEM
ODE
OFF/ON
AM
OFF/ON
FRONT
OFF/ON
89