Preferential Memory Scan - Yaesu FT-7900R Operating Manual

Preferential Memory Scan

The FT-7900R also allows you to set up a "Preferential Scan List" of channels which you
can "flag" within the memory system. These channels are
designated by a " " icon when you have selected them,
one by one, for the Preferential Scan List.
When you initiate memory scanning, beginning on a channel with the " " icon appended,
only those channels bearing the " " icon will be scanned. If you initiate scanning on a
channel which does not have the " " icon appended, you will scan all channels including
those with the " " icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Press the [ V/M ( MW )] key momentarily to enter the Memory Recall mode, if you are not
using memories already.
2. Rotate the DIAL knob to select the channel which you wish to add to the Preferential
Scan List.
3. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
4. Rotate the DIAL knob to select Menu #40 (SKIP
5. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to "ONLY
on the "Preferential Scan List".
6. When you have made your selections, press the
[ BAND ( SET )] key momentarily to save the new set-
ting, then press and hold in the [ BAND ( SET )] key for 1/2 second to exit to normal
operation.
7. To remove a channel from the Preferential Scan List, select "OFF
To initiate Preferential Memory Scan:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #38 (SCN MD
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to "ONLY
4. Press the [ BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND ( SET )]
key for 1/2 second to exit to normal operation.
5. Now, press the [ SCAN ( SEL )] key momentarily to initiate Preferential Memory Scan-
ning. Only the channels which have the " " icon appended to the channel number will
be scanned.
6. To cancel Preferential Memory Scanning, select "MEM
FT-7900R O
PERATING
M
EMORY
ONLY". The current channel is listed
ONLY ONLY
ONLY
ONLY". ONLY ONLY ONLY
M
ANUAL
S
CANNING
SKIP). SKIP SKIP
SKIP
SCN MD SCN MD
SCN MD SCN MD).
MEM" in step 3 above.
MEM MEM
MEM
S
CANNING
OFF" in step 5 above.
OFF OFF
OFF
45