Advanced Operation; Lock Feature; Keyboard Beeper - Yaesu FT-7900R Operating Manual

In order to prevent accidental frequency change or inadvertent transmission, the FT-7900R
panel switches, microphone switches (except the PTT switch), and DIAL knob may be locked
out.
To activate the lock feature, press and hold in the [
key for 1/2 second. The "
LCD.
To disable the lock feature, press and hold in the [
key for 1/2 second again.
You may change the lockout combinations by
Menu #21 (LOCK). See page 73 for details.
A key/button beeper provides useful audible feedback whenever a key/button is pressed.
If you want to turn the beep off:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #5 (BEEP
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to change the setting to "OFF
4. Press the [ BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND ( SET )]
key for 1/2 second to exit to normal operation.
5. To turn the beep back on again, select "KEY
The beeper sounds when you press any key.
KEY KEY KEY: KEY KEY
KEY+SC: The beeper sounds when you press a key, or when the scanner stops.
KEY+SC KEY+SC
KEY+SC KEY+SC
FT-7900R O
PERATING
A
DVANCED
L F
OCK EATURE
" icon will appear on the
K
EYBOARD
BEEP BEEP). BEEP
BEEP
OFF." OFF OFF
OFF
KEY" or "KEY+SC
KEY KEY
KEY
M
ANUAL
O
( L )]
( L )]
B
EEPER
KEY+SC (default)" in step 3 above.
KEY+SC KEY+SC
KEY+SC
PERATION
23