Yaesu FT-7900R Operating Manual page 65

P
ROGRAMMING THE
Press and hold the [ LOW ( ACC )] key
Function
Recall the Weather Broadcast Channels.
< WX > < WX >
< WX > < WX > < WX >
Reverses the transmit and receive frequencies during split-frequency operation.
< REV > < REV > < REV > < REV > < REV >
Selects Repeater Shift direction.
< RPTR > < RPTR > < RPTR > < RPTR > < RPTR >
Disable the noise squelch action, allowing you to hear very weak signals near the
< SQ.OF > < SQ.OF > < SQ.OF >
< SQ.OF > < SQ.OF >
background noise level.
Selects the Key locking schemes. ( Short-cut to Menu #21: LOCK
< LOCK > < LOCK >
< LOCK > < LOCK > < LOCK >
Sets the display Brightness.
< DIM > < DIM > < DIM > < DIM > < DIM >
For Menu #28 PRG P1 ( PRG ACC ) , #29 PRG P2 ( PRG P ) , #30 PRG P3 ( PRG P1 ) , #31 PRG P4 ( PRG P2 )
Function Press the button
Disable the noise squelch action, allow-
< SQ.OF > < SQ.OF > < SQ.OF >
< SQ.OF > < SQ.OF >
ing you to hear very weak signals near
the background noise level.
Activates 1750 Hz Tone Burst.
< TCAL > < TCAL > < TCAL > < TCAL > < TCAL >
Activate the Smart Search operation.
< SSCH > < SSCH >
< SSCH > < SSCH > < SSCH >
Activate the ARTS
< ARTS > < ARTS > < ARTS >
< ARTS > < ARTS >
Select the CTCSS Tone Frequency.
< TN.FQ > < TN.FQ > < TN.FQ > < TN.FQ > < TN.FQ >
( Short-cut to Menu #44: TN FRQ
Select the DCS code.
< DCSC> < DCSC> < DCSC>
< DCSC> < DCSC>
( Short-cut to Menu #9: DCS.COD
Recall the Weather Broadcast Channels.
< WX > < WX > < WX > < WX > < WX >
Selects Repeater Shift direction.
< RPTR > < RPTR > < RPTR > < RPTR > < RPTR >
Activates the Priority Channel Scanning
< PRI > < PRI > < PRI >
< PRI > < PRI >
(Dual Watch).
Selects the transmit power output level.
< LOW > < LOW >
< LOW > < LOW > < LOW >
Activates the CTCSS or DCS operation.
< TONE > < TONE > < TONE >
< TONE > < TONE >
Allows tuning in 1-MHz step on the VFO
< MHz > < MHz > < MHz > < MHz > < MHz >
frequency.
Reverses the transmit and receive fre-
< REV > < REV > < REV >
< REV > < REV >
quencies during split-frequency opera-
tion.
Recall the Home Channel.
< HOME > < HOME > < HOME > < HOME > < HOME >
Switches operating band.
< BAND > < BAND >
< BAND > < BAND > < BAND >
Switches frequency control among the
< V < V/M > < V M > M > M >
< V < V M >
VFO, Memory System, and Home chan-
nel.
Activate the Scanner.
< SCAN > < SCAN > < SCAN > < SCAN > < SCAN >
FT-7900R O
PERATING
M
ISCELLANEOUS
K
For Menu #27 PRG PNL
operation.
TM
TN FRQ )
TN FRQ TN FRQ
TN FRQ
DCS.COD )
DCS.COD DCS.COD
DCS.COD
M
ANUAL
A
EY SSIGNMENTS
Press and hold the button
Disable the noise squelch action, allow-
ing you to hear very weak signals near
the background noise level.
Activates 1750 Hz Tone Burst.
Activate the ARTS
–
–
–
–
Selects Repeater Shift direction.
–
Recall the Weather Broadcast Channels.
Reverses the transmit and receive fre-
quencies during split-frequency (re-
peater) operation.
Activates the Priority Channel Scanning
(Dual Watch).
Selects Repeater Shift direction.
Switch the Memory Channel display be-
tween the "Frequency" format and "Al-
pha-numeric Tag" format.
Enter the Set ("Menu") mode.
Transfer the VFO contents into a Memory
register.
Select the scan mode.
S
ETTINGS
LOCK )
LOCK LOCK
LOCK
operation.
TM
63