Yaesu FT-7900R Operating Manual page 78

( "S
M
ENU
Menu #39 [ SHIFT ]
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.00 - 99.95 MHz (50 kHz step)
Default: Depends on the band of operation.
Menu #40 [ SKIP ]
Function: Selects what action will happen on a "flagged" Memory Channel
Available Values: OFF/SKIP/ONLY
Default: OFF
OFF: All memory channels will be scanned (the "flag" will be ignored).
SKIP: The scanner will "skip" the flagged ("SKIP") channels during scanning.
ONLY: The scanner will only scan the flagged (Preferential) channels during scanning.
Menu #41 [ SPLIT ]
Function: Enables/Disables split CTCSS/DCS coding.
Available Values: SPL.OFF/SPL.ON
Default: SPL.OFF
When this Menu Item is set to "ON," you can see the following additional parameters after
the "DCS" parameter while selecting the Menu #42: SQL.TYP.
D D D D D : DCS Encode only
(the "DCS" icon will blink during operation)
ENC DCS: Encodes a CTCSS Tone and Decodes a DCS code
ENC DCS ENC DCS
ENC DCS ENC DCS
(the "DCS" and "ENC" icons will appear during operation)
Encodes a DCS code and Decodes a CTCSS Tone
D-DEC D-DEC: D-DEC D-DEC D-DEC
(the "DCS" icon will blink and the "DEC" icon will appear during opera-
tion)
Select the desired operating mode from the selections shown above.
Menu #42 [ SQL.TYP ]
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF/ENC/ENCDEC/REV TN/DCS
Default: OFF
ENC: CTCSS Encoder
ENC DEC: CTCSS Encoder/Decoder
REV TN: Reverse CTCSS Decoder
DCS: Digital Code Squelch Encoder/Decoder
76
" ) M
ET ODE
FT-7900R O
PERATING
M
ANUAL