Memory Bank Operation - Yaesu FT-7900R Operating Manual

M
EMORY
R
EGULAR

Memory Bank Operation

Memory Bank Assignment
1. Recall the memory channel to be assigned to a Memory Bank. Memory channels L1
~ L50 U50 (band/scanning limit memories) may not be assigned to a Memory Bank.
L50 L50 L50/U50 U50 U50
L50 U50
2. Press and hold in the [ SCAN ( SEL )] key for 1/2 sec-
ond, then rotate the DIAL knob to select the Memory
Bank you want as the Memory Bank for this channel
("BANK1 BANK1" ~ "BANK20 BANK20" ).
BANK1 BANK1 BANK20 BANK20
BANK1 BANK20
3. Press and hold in the [ V/M ( MW )] key
for 1/2 second to lock in the selected
M e m o r y B a n k , t h e n p r e s s t h e
[ V/M ( MW )] key momentarily to copy
the memory channel data into the
Memory Bank.
1) You may assign one memory channel into several Memory Banks.
2) The PMS memory channels (L1/U1 through L50/U50) may not be assigned to
a Memory Bank.
38
O
PERATION
M
EMORY
C O
HANNEL PERATION
Memory Channel
CH 000 145.000 MHz
CH 001 145.500 MHz
CH 002 435.000 MHz
CH 003 435.500 MHz
CH 004 145.800 MHz
CH 005 436.000 MHz
CH 006 128.800 MHz
CH 997 145.620 MHz
CH 998 436.780 MHz
CH 999 128.600 MHz
FT-7900R O
L1 L1 U1 U1
L1 L1/U1 U1 U1
Memory Bank "1"
144 MHz Amateur Band Channels
Memory Bank "2"
430 MHz Amateur Band Channels
Memory Bank "3"
All Amateur Band Channels
Memory Bank "4"
Club Channels
Memory Bank "5"
Air Band Channels
M
PERATING ANUAL