Yaesu FT-2900R Operating Manual page 59

I
NTERNET
FRG ( "F
4. Rotate the DIAL knob to select "
"#": the first digit of the DTMF string).
5. Press the [ LOW ( A/N )] key momentarily to accept the first
digit and move to the second digit of the DTMF string.
6. Repeat the previous steps until you have completed the ac-
cess code ("#(F)1101D").
7. If you wish to attach an alpha/numeric name "Tag" to the
Internet Memory, proceed to the next step; otherwise press and hold in the [ MHz ( SET )]
key for one second to save the setting.
8. Press the [ MHz ( SET )] key twice to enable programming of the name tag (the Internet
Memory register number will blink).
9. Press the [ D/MR ( MW )] key momentarily. The "- - - - - - - - - - ALPH
notation will appear on the display for 2 seconds, then the
Memory register number will blink again.
10. Press the [ MHz ( SET )] key momentarily. The first digit will blink.
11. Rotate the DIAL knob to select the first digit of the desired
label.
12. Press the [ LOW ( A/N )] key to move to the next character.
13. If you make a mistake, press the [ REV ( DW )] key to back-space the cursor, then re-enter
the correct letter, number, or symbol.
14. Repeat steps 11 and 12 to program the remaining letters,
numbers, or symbols of the desired label. A total of six char-
acters may be used in the creation of a label.
15. When you have finished programming the label (6 characters or less), press and hold in
the [ MHz ( SET )] key for one second to confirm the label.
16. Repeat steps 1 through 15 to store other access codes, if so desired.
17. Press the PTT switch to save the setting and exit to normal operation.
Operation (Accessing an FRG Node)
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "23 INT MD
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
set this Set Mode Item to "
Internet Link System" mode).
3. Press and hold in the [ MHz ( SET )] key for one second to
save the new setting.
4. Press the [ ] key momentarily to activate the Internet Con-
nection feature. The "Int" notation will appear at the right
of the frequency.
FT-2900R O
PERATING
C
ONNECTION
' R
RIENDS ADIO
F F F F F " (representing DTMF
23 INT MD 23 INT MD
23 INT MD." 23 INT MD
FRG FRG FRG " (thus activating the "Other
FRG FRG
M
ANUAL
F
" ) M
G
ROUP
ALPHA- A- A- A- A- - - - - - "
ALPH ALPH
ALPH
EATURE
ODE
55