Table of Contents
Advertisement
24 INT.A/M
Function: Enables/Disables DTMF Autodialer feature while using the Internet Connection
feature.
Available Values: MANUAL / AUTO
Default: MANUAL
25 INT.SET
Function: Selects the memory register for an Access Number (DTMF code) for non-WiRES
Internet Link System access.
Available Values: F0 - F9
Default: F1
26 LOCK
Function: Selects the Control Locking Lockout combination.
Available Values: KEY / DIAL / K+D / PTT / K+P / D+P / ALL
Default: OFF
Note: "K" = "Key;" "D" = "Dial;" and "P" = "PTT."
27 MCGAIN
Function: Adjust the microphone gain level.
Available Values: 1 - 9
Default: 5
28 MEM.SCN
Function: Selects the Memory Scan mode.
Available Values: TAG1 / TAG2 / ALL CH
Default: ALL CH
ALL CH: The scanner sweeps all Memory channels.
TAG1:
The scanner sweeps only those Memory channels with the same "first" digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2:
The scanner sweeps only those Memory channels with the same "first" and "sec-
ond" digits of the alpha/numeric tag as the first channel on which scanning started.
29 MW MD
Function: Selects the method of selection of channels for Memory Storage.
Available Values: NEXT / LOWER
Default: NEXT
NEXT:
Stores the data into the memory channel which is next-highest from the last-
stored memory channel.
LOWER: Stores the data into the lowest-available "free" channel.
FT-2900R O
PERATING
"S
M
S
ENU
ELECTION
M
ANUAL
" ( M
ET
ENU
D
ETAILS
) M
ODE
77
Hide quick links:
Advertisement
Table of Contents
