Arts™ Polling Time Options; Arts™ Alert Beep Options - Yaesu FT-2900R Operating Manual

Hide thumbs Also See for FT-2900R:
Table of Contents

Advertisement

ARTS™
5. Press the assigned microphone's programmable button momentarily to exit ARTS™
operation and resume normal functioning of the transceiver.
ARTS™ Polling Time Options
The ARTS™ feature may be programmed to poll every 25 seconds (default value) or 15
seconds. The default value provides maximum battery conservation, because the polling
signal is sent out less frequently. To change the polling interval:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "3 3 3 3 3
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select the desired polling interval (
3. When you have made your selection, press and hold in the
[ MHz ( SET )] key for one second to save the new setting and exit to normal operation.
ARTS™ Alert Beep Options
The ARTS™ feature allows two kinds of alert beeps (with the additional option of turning
them off), so as to alert you to the current status of ARTS™ operation. Depending on your
location and the potential annoyance associated with frequent beeps, you may choose the
Beep mode which best suits your needs. The choices are:
IN RNG
IN RNG
IN RNG
:
The beeps are issued only when the radio first confirms that you are within
IN RNG
IN RNG
range, but does not re-confirm with beeps thereafter.
ALWAYS
ALWAYS
ALWAYS
: Every time a polling transmission is received from the other station, the alert
ALWAYS
ALWAYS
beeps will be heard.
OFF
OFF
:
No alert beeps will be heard; you must look at the display to confirm current
OFF
OFF
OFF
ARTS™ status.
To set the ARTS
Beep mode, use the following procedure:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "2 2 2 2 2
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
select the desired ARTS™ Beep mode (see above).
3. When you have made your selection, press and hold in the
[ MHz ( SET )] key for one second to save the new setting
and exit to normal operation.
58
( A
UTOMATIC
AR INT
AR INT
AR INT
AR INT
AR INT
15
15
15
15
15
AR BEP
AR BEP
AR BEP
AR BEP
AR BEP
R
T
ANGE
RANSPONDER
."
or
25
25
25
seconds).
25
25
."
FT-2900R O
)
S
YSTEM
M
PERATING
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents