Cw Training Feature - Yaesu FT-2900R Operating Manual

Hide thumbs Also See for FT-2900R:
Table of Contents

Advertisement

CW T
RAINING
The FT-2900R provides a CW Training feature, which sends random Morse Code via the
sidetone (heard in the speaker), so you can improve your CW proficiency.
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "12 CWTRNG
2. Press the [ MHz ( SET )] key momentarily to enable adjust-
ment of this Set Mode Item.
3. Press the [ LOW ( A/N )] key to select the Training mode (dis-
played in fine print at the upper edge of the LCD):
1A
1A
1A
: Sends five Alphabet characters only
1A
1A
A A A A A
:
Sends Alphabet characters only (Repeatedly)
1n
1n
: Sends five Numeric characters only
1n
1n
1n
n n n n n
:
Sends Numeric characters only (Repeatedly)
1An
1An
1An
:Sends five Alphabet, Numeric, "?," and "/" characters (Mixed)
1An
1An
An
An
An
: Send Alphabet, Numeric, "?," and "/" characters (Mixed, Continuously in group
An
An
of five)
4. Rotate the DIAL knob to select the Morse speed. You may
select the units of the code speed between "WPM (Words
per minute)" and "CPM: characters per minute)" by press-
ing the [ D/MR ( MW )] key.
5. Press the [ REV ( DW )] key to begin generation of the code
characters (CW sidetone only, the radio does not transmit);
the transmitted characters will appear on the display. If one
" modes is selected in step 3 above, press the [ REV ( DW )] key to send another
of the "
1 1 1 1 1
code group.
6. To disable the CW Training feature, press the [ MHz ( SET )] key momentarily.
7. Press and hold in the [ MHz ( SET )] key for one second to exit to normal operation.
The "CPM" selection is based on the international "PARIS" standard, which
stipulates five characters per word.
60
F
EATURE
12 CWTRNG."
12 CWTRNG
12 CWTRNG
12 CWTRNG
FT-2900R O
PERATING
M
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents