Lock; Dim - Yaesu FT-2000 Operating Manual

:
B O
ASIC PERATION R A B
ECEIVING ON MATEUR ANDS

LOCK

You may lock the setting of the Main Tuning Dial knob, to prevent accidental frequency change.
[ LOCK ] Button
To lock out the Main Tuning Dial
knob, just press the [ LOCK ] but-
ton that is located to the right of the
Dial. To unlock the Dial setting, and
restore normal tuning, just press the
[ LOCK ] button once more.

DIM

The illumination level of the analog meter and frequency display may be reduced, if you are using the transceiver in a dark
environment where high brightness is not desired.
To reduce the illumina-
[ DIM ] Button
tion level, press the
[ DIM ] button, located
to the left of the analog
meter. To restore full
brightness, press the
[ DIM ] button once
more.
You may also customize the amount of brightness reduc-
tion engaged by the pressing of the [ DIM ] button, and may
use different brightness levels for different front panel ar-
eas. Menu item "008 diSP DIM MTR" adjusts the bright-
ness level of the analog meter; while menu item "009 diSP
DIM VFD" sets the brightness levels of the frequency dis-
play (these settings are effective only when the [ DIM ] but-
ton is pressed).
Page 40 FT-2000D O M