Rotator Control Functions - Yaesu FT-2000 Operating Manual

C
ONVENIENCE
When using a YAESU model G-800DXA, G-1000DXA, or G-2800DXA rotator (not supplied), it is possible to control it
from the front panel of the FT-2000D.
1 Press and hold in the [ ENT ] button (one of the [ BAND ]
button) for two seconds. The frequency display area
will change over to the "Rotator Control" configura-
tion.
2 Press either the [ F2 ( CH-2 )] button or the [ F3 ( CH-3 )]
button to rotate the antenna. Pressing the [ F2 ( CH-2 )]
button will cause rotation to the left (counter-clock-
wise), while pressing the [ F3 ( CH-3 )] button will cause
rotation to the right (clockwise).
3 Press the [ F5 ( MEM )] button or the [ F6 ( DEC )] button
to control the speed of rotation. Pressing the
[ F5 ( MEM )] button will cause slower rotation, while
pressing the [ F6 ( DEC )] button will speed up rotation.
Usually, you will be using the "100%" setting.
When you are through exercising rotator control, press the
[ ENT ] button momentarily. The frequency display will
return to the main display field.
Page 48
F
EATURES
R C
OTATOR ONTROL
Counter-clockwise Rotation
Clockwise Rotation
OPTIONAL CONNECTION CABLE ( )
T9101556
F
UNCTIONS
[ F5 ( MEM )] , [ F6 ( DEC )] Button
[ F2 ( CH-2 )] , [ F3 ( CH-3 )] Button
Speed ( 0 % ~ 100 % )
Speed Up
Speed Down
OP ERA TION ADJ. MODE FULL OV ERLAP A B OUT VOL
MODE SCALE LE D ADJ ADJ
EXT SELECT ADJ PRESET
CONTROL SWITCH ADJ
FT-2000D O
[ ENT ] Button
Direction ( 0° ~ 360° )
"Overlap" Indicator
M