Yaesu FT-2000 Operating Manual page 24

F P
RONT ANEL
F1 - F7 / DISPLAY Keys
These keys can be used to control the Voice Memory
capability for the SSB/AM/FM modes, and the Con-
test Keyer for the CW mode. You can also play back
up to 15 seconds of incoming received audio, as well,
for verification of a missed callsign or other purposes.
When the optional DMU-2000 Data Management Unit
is connected, you can also use the "Function" keys for
the various functions associated with each "page" of
the external display's capability.
[ F1 ( CH 1 )] - [ F4 ( CH 4 )] key
In the case of Voice Memory, up to 20 seconds of au-
dio may be stored on each channel. For CW messages,
up to 50 characters ("PARIS" specification) may be
stored into each channel. See page 76 (Voice Memory)
or page 88 (Contest Keyer) for details.
[ F5 ( MEM )] key
This key is pressed for the purpose of storing either a
Voice Memory or a Contest Keyer Memory channel's
contents. See page 76 (Voice Memory) or page 88
(Contest Keyer) for details.
[ F6 ( DEC )] key
When utilizing the sequential contest number capability
of the Contest Keyer, press this key to decrement (back
up) the current Contest Number by one digit (i.e. to back
up from #198 to #197, etc.). See page 91 for details.
Page 22
C
ONTROLS
& S
WITCHES
[ F7 ( P.BACK )] key
Press and hold in this button for 2 seconds to activate
the recording feature of the internal Digital Voice Re-
corder. The Voice Recorder allows you to record the
Main band (VFO-A) receiver audio for the most-re-
cent 15 seconds. While you're recording the receiver
audio, the " " icon will appear in the display.
Press this button momentarily to stop the recording,
then press this button momentarily again to play back
the receiver audio for the most-recent 15 seconds of
reception before you stopped the recording.
While playing back the receiver audio, the "
will appear in the display.
Press and hold in this button for 2 seconds again to
resume recording.
[ DISPLAY ] key
Press and hold in this key for two seconds to cause the
[ F1 ( CH 1 )] - [ DISPLAY ] keys to act as "Function"
keys for the optional DMU-2000 Data Management
Unit if connected.
FT-2000D O
" icon
M