Lock; Dim; Operation On 60-Meter (5 Mhz) Band (U.s. And U.k. Versions Only) - Yaesu FTDX5000 Series Operating Manual

B
ASIC
You may lock the setting of the Main Tuning Dial knob, to prevent accidental frequency change.
To lock out the Main Tuning Dial knob, just press the
[ LOCK ] button that is located to the right of the Main
Tuning Dial knob. To unlock the Dial setting, and restore
normal tuning, just press the [ LOCK ] button once more.
When the Main Tuning Dial knob is "locked", the blue
" " icon will appear on the display.
The illumination level of the analog meter and frequency display may be reduced, if you are using the transceiver in a dark
environment where high brightness is not desired.
To reduce the illumination level, press the [ DIM ] button,
located to the left of the analog meter. To restore full bright-
ness, press the [ DIM ] button once more.
A :
DVICE
The amount of brightness may be customized for different
front panel areas. The follwing menu settings are effective
when the [ DIM ] button is depresses:
008 DISP DIM MTR: for analog meter
009 DISP DIM VFD:
010 DISP DIM OEL: SUB DISPLAY windows
011 DISP DIM ELCD: for Spectrum Scope display
O
PERATION ON
The 60-meter frequencies have been incorporated into the FT
USB or CW (U.S. version only), and they appear between the "last" PMS channel ("P-9U
channel (Channel 1).
To operate on the 60-meter (5 MHz) band:
1. Press the [ V/M ] button once, if necessary, to enter the
"Memory" mode (the "
display.
2. Press and hold in the [ BAND/MCH ] button for two
seconds. The button will glow yellow to signify that
rotation of the [ CLAR ( VFO-B )] knob will allow se-
lection of the memory channel.
3. Memory channels "US-0 US-0" through "US-9
US-0 US-0 US-0
sion), or "US-1 US-1" through "US-7
US-1 US-1
US-1
pre-programmed at the factory with the permitted fre-
quencies in the 5 MHz band. The USB mode is auto-
matically selected for channels "US-1
5 5 5 5 5 " (U.S. version), or "US-1
version). The CW mode is automatically selected on
channels "US-6 US-6" through "US-0
US-6 US-6 US-6
4. To exit from 60-meter operation and return to the VFO
mode, just press the [ V/M ] button.
N :
OTE
The operating frequencies and modes for 5 MHz band op-
eration are both fixed, and may not be changed.
FT 5000 O
DX PERATING
O
PERATION
for frequency dispaly
of the optional SM-5000 Sta-
tion Monitor
( 5 MH
60-M
ETER
" icon will appear on the
US-9" (U.S. ver-
US-9 US-9 US-9
US-7" (U.K. version), are
US-7 US-7
US-7
US-1" through "US-
US-1 US-1 US- US-
US-1 US- US-
US-1" through "US-7 US-7" (U.K.
US-1 US-1 US-7 US-7
US-1 US-7
US-0" (U.S. version).
US-0 US-0 US-0
M
ANUAL
:
R
ECEIVING ON

LOCK

DIM

) B
AND ( U.S.
Z
5000 using fixed memory channels. These channels are set to
DX
C
HANNEL
N U.S. V
UMBER
US-1 5.332000 MHz (USB)
US-2 5.348000 MHz (USB)
US-3 5.358500 MHz (USB)
US-4 5.373000 MHz (USB)
US-5 5.405000 MHz (USB)
US-6 5.332000 MHz (CW)
US-7 5.348000 MHz (CW)
US-8 5.358500 MHz (CW)
US-9 5.373000 MHz (CW)
US-0 5.405000 MHz (CW)
A B
MATEUR
[ LOCK ] Button
[ LOCK ] Button
U.K.
AND VERSIONS ONLY
P-9U") and the first "regular" memory
P-9U P-9U P-9U
[ BAND/MCH ] Button
[ CLAR ( VFO-B )] Knob
[ V/M ] Button
F /M
REQUENCY ODE
U.K. V
ERSION
5.260000 MHz (USB)
5.280000 MHz (USB)
5.290000 MHz (USB)
5.368000 MHz (USB)
5.373000 MHz (USB)
5.400000 MHz (USB)
5.405000 MHz (USB)
—
—
—
Page 41
ANDS
)
ERSION