Network Connection (Smb); Tcp/Ip Setting For This Machine; Smb Setting For This Machine; Printer Driver Installation By Specifying Printers Using The Add Printer Wizard - Konica Minolta bizhub C203 Operation Manual

Installation using the Add Printer wizard
4.1.2

Network connection (SMB)

When using the SMB printing, specify the port by specifying the printer during the printer driver installation
process. Printers can be specified either by searching printers on the network, or by entering the printer
name.

TCP/IP setting for this machine

Specify the IP address in the TCP/IP Setting screen of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User manual – Network
Administrator.
Note
To use SMB printing in the IPv6 environment, the Direct Hosting setting must be enabled. For details,
refer to the User manual – Network Administrator.

SMB setting for this machine

In "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,
and workgroup.
!
Detail
For details on the SMB settings of this machine, refer to the User manual – Network Administrator.

Printer driver installation by specifying printers using the Add Printer Wizard

Reminder
When installing on Windows XP or Server 2003, administrator permissions are required.
1
Insert the printer driver DVD into the DVD drive of the computer.
2
Click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open Control Panel from the Start menu,
select "Printers and Other Hardware", and then click "Printers and Faxes".
3
For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
For Windows Server 2003, double-click the "Add Printer" icon.
The Add Printer Wizard starts.
4
Click the [Next] button.
5
Select "Local printer attached to this computer", and then click the [Next] button.
– Clear the "Automatically detect and install my Plug and Play printer" check box.
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select "Local Port" for "Type of port:"
7
In the "Enter a port name" box, enter "\\NetBIOS name\print service name".
– Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMB
Setting screen of this machine.
8
Click the [OK] button.
The Add Printer Wizard appears.
9
Click the [Have Disk] button.
bizhub C353/C253/C203 (FE2)
4
4-5