Installation Under Windows 2000; Installing The Twain Driver Under Windows 2000 - Konica Minolta bizhub 160 User Manual

Installing the TWAIN driver
4.2

Installation under Windows 2000

Installing the TWAIN driver under Windows 2000

1
With Windows running, insert the CD-ROM into your computer's CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The "Found New Hardware Wizard" dialog box appears.
4
Click [Next].
5
Select
the "Install Hardware Device Drivers" dialog box, and then click [Next].
The "Locate Driver Files" dialog box appears.
6
Select
7
Click [Browse...] on the next dialog box, browse to
"Driver\(language)\2k_XP" on the CD-ROM, and then click [Open].
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\2k_XP
8
Click [OK], and follow the instructions that appear on the screen until
the "Completing the Found New Hardware Wizard" dialog box ap-
pears.
9
Click [Finish].
This completes the installation of the TWAIN driver. The "Found New
Hardware Wizard" dialog box appears again.
10
Repeat steps 4 through 9 to install the printer driver.
TWAIN Driver
Search for a suitable driver for my device (recommended)
location, and click [Next].
Specify a
4
in
4-3