Program Sysex Data - DigiTech Artist GSP-2101 Owner's Manual

Section 5 - The GSP-2101 and MIDI
• Press Function key [2]. The display reads:
The total number of bytes to be dumped may vary depending on how many of your
own custom Programs and Algorithms you have in memory.
• To dump the data, press Function key [1]. The display briefly reads:
after which you are returned to the MIDI setup menu. To abort the command, press
Function key [2].
•Exit the Dump screen by pressing the [MIDI] button.
Program SysEx Data: The GSP-2101 Artist has the convenient ability to dump an individual
Program as a MIDI program number other than its own. This is particularly useful in cases where
you need to perform Program dumps from one GSP-2101 Artist to another, and you don't want
to overwrite the corresponding Program number in the destination unit.
To dump an individual Program, do the following:
• After entering the MIDI setup menu, press the [NEXT] key three times. The display
reads:
• Press Function key [1] once. A cursor appears under the DUMP PROGRAM number.
• Use the Data wheel to select the number of the Program you want to dump.
• Press Function key [2]. A cursor appears under the AS MIDI PRG number.
• Use the Data wheel to select the Program number you want the Program dumped as.
• To initiate the dump, press Function key [3] once. The display briefly reads:
• When the dump has finished, press the [MIDI] key once to exit.
68
Press ¡ to start
MIDI data dump
of entire system.
18340 Bytes Total
*** Sending MIDI ***
*** System Data
*** /
*** 18340 Bytes
¡Dump program
™ as MIDI prg
£Start the dump
≤
Sending program 1
as MIDI program 1
***
***
***
1
1
≥
GSP-2101 Artist Owner's Manual