Naming Programs - DigiTech Artist GSP-2101 Owner's Manual

Section 3 - Editing Effects
N P
AMING ROGRAMS
The GSP-2101 Artist lets you give your Programs and Algorithms custom names (up to 20 char-
acters in length). Use the Data wheel and the Function keys to make naming quick and easy.
Function key [1] changes the character from upper to lower case and vice versa. Function key [2]
inserts a space into the Program name, and Function key [3] jumps to the numbers in the char-
acter set.
To custom name a Program or Algorithm, do the following:
• Press the [NAME] button once. The display looks something like this:
The numbers preceding each option indicates the Function key that will perform the
function shown.
• Using the Data wheel, scroll to the character you want to use, or press one of the
Function keys. When you have selected the character you want, press the Parameter
[NEXT] button. Note that the cursor moves to the next character. Repeat this proce-
dure until the display shows what you want.
Unique to the GSP-2101 Artist are several special naming functions. The [<], and [>] buttons in
the FX Library group let you bump an entire name, or section of a name, left or right in one-
space increments. Whether you move left or right, all characters to the right of the cursor will
move.
The Program [UP] button copies a character into memory. This lets you place a copy of that
character (using the Program [DOWN] key) anywhere in the name.
NOTE: if you exit the name mode before storing, an asterisk appears in the upper right corner
of the display. This means that you must store the changes you have made in order for
your custom Program name to be retained in memory.
16
Dry Saturated Tube
¡CAPS ™SPC £NUM
GSP-2101 Artist Owner's Manual