Section 3 - Basic Operations; About The Bp-8 Valve's Modes; Program Mode; Bank Mode - DigiTech BP-8 Valve User Manual

Section -3 Basic Operations

Section 3 - Basic Operations

About the BP-8 Valve's modes

The BP-8 Valve offers several different modes, allowing easy operation of the Effects and Parameters. The modes are as follows:

PROGRAM MODE

Program mode allows you to scroll through the BP8's User and Factory Programs using the Value <UP> and <Down> buttons and the <UP>
and <DOWN> foot switches. Enter Program mode by pressing the <UP> and <DOWN> foot switches simultaneously until the Program LED
lights and the letter P appears briefly in the display. Foot switches <1-4> will act as on/off toggle switches for the specified effects in Program
mode.

BANK MODE

Bank mode is the factory default setting and allows you to scroll quickly through Factory and User Banks by using the <UP> and <DOWN>
foot switches. Enter Bank mode by pressing the <UP> and <DOWN> foot switches simultaneously until the Bank LED lights and a B appears
briefly in the display window. When you enter Bank mode, the Bank and Program numbers from the previous mode will be retained.
When the <UP> and <DOWN> footswitches are used in Bank mode, you will scroll through Banks only. When you change a Bank using this
method, the previous Program number is not displayed with the new Bank. The LEDs above foot switches <1-4> will begin flashing, indicating
that you can choose a Program in the selected Bank by pressing one of the four foot switches. Once a Program number has been selected, both
the Bank and Program numbers will be displayed.

EDIT MODE

Allows you to modify effect parameters in a Program. Enter Edit mode by pressing the <EDIT> button. The Display window now shows the
value of the parameter indicated by the LEDs in the Matrix. You can scroll through the Parameter matrix using the Parameter Select buttons.
The <UP> and <DOWN> buttons allow you to scroll through the vertical Parameter LEDs, while the <LEFT> and <RIGHT> buttons allow
you to scroll through the horizontal Effect LEDs. Follow the horizontal and vertical LEDs across the matrix to the point where they intersect.
This will be the parameter you are about to edit.
8
BP-8 Valve
User Guide