About Sysex Documentation - DigiTech Artist GSP-2101 Owner's Manual

Now we are actually feeding the two pre-amps the same guitar signal. Most Amp heads have an
FX loop, so lets put this to work for us. Use an instrument cable to connect the Amp head's FX
loop out to the Left (mono) FX Loop return of the 2101. Take another cable and connect the
2101's Left Output (mono) to the Amp head's FX loop return. The whole wiring configuration
should look something like this:
With this type of setup (it also, can be expanded to run is stereo ), you get both great pre-amps,
and the Amp head now has digital effects it can work with. The programmable FX Loop in the
2101 becomes control central for this rig. Signal from the guitar always feeds both pre-amps, but
the 2101's FX Loop decides what happens from there. If the Loop is set to BYPASS, the 2101's
pre-amp becomes the principle preamp. When the FX Loop is set to NO SUM, the Amp head
takes over...except that the Digital Effects section of the 2101 is still in the picture! Your old
Amp head never sounded better! If you are real experimental, setting the FX Loop to SUMMED
gives you usage both pre-amps.
A S E D
BOUT YS X OCUMENTATION
If you are interested in obtaining a copy of the SysEx documentation for the GSP-2101 for the
purposes of writing a Editor/Librarian or some other application that requires extended control
of your 2101, please contact us at:
GSP-2101 SysEx Documents
Attn: Product Management Department
8760 South Sandy Parkway
Sandy, Utah 84070 USA
or call our Customer Service Department (801)566-8800
GSP-2101 Artist Owner's Manual
Section 8- Advanced Applications
Fig 8-2
89