Cc Transmit Channel - DigiTech Artist GSP-2101 Owner's Manual

• Press the [UTILITY] key once. The display reads:
• Press Function key [2] once. The display reads:
• Press Function key [3]. The display reads:
• Press Function key [3]. The display reads:
• To change the internal or external CC pedals' MIDI CC number, press the
• Use the Data wheel to change the value as desired.
• Press [UTILITY] to return to exit this menu.
CC Transmit Channel - This option allows you to set the MIDI channel on which CCs
will be sent out the GSP-2101 Artist's MIDI Out port to other MIDI devices. If you are
using the Control One for the GSP-2101 Artist only, you don't need to worry about set-
ting up this option. However, if you plan to use the Control One for continuous control
over other MIDI devices (either in conjunction with the GSP-2101 Artist or by them-
selves), you need to assign a MIDI transmit channel for each of the CC numbers you'll
be using for continuous control of the other devices.
To change the MIDI channels on which the selected CCs will transmit to other MIDI
devices, do the following:
GSP-2101 Artist Owner's Manual
Section 6 - The GSP-2101 and the Control One
¡Output Mode: Stereo
™Foot Controller
¡Patch Assignment
™LED Assignment
£Exp Pedals and
CC Xmit Setup
¡Exp Pedal Calibrate
™Exp Pedal Min/Max
£Exp Pedal CC Assign
and CC Xmit Setup
¡Int Exp CC:Not Used
™Ext Exp CC:Not Used
£CC Transmit Channel
This screen has three options. You can change the internal pedal's MIDI CC
number, the external CC pedal's MIDI CC number, or you can change the
MIDI channel(s) on which the internal or external pedal will transmit MIDI
CC messages to other MIDI devices (using the MIDI Out port).
appropriate Function key. Note that a cursor appears under the value of the
pedal you selected.
≥
≥
77