Other Footswitch Functions; Program Up/Down; Bank Up/Down; List Up/Down - DigiTech Artist GSP-2101 Owner's Manual

NOTE: Remember that the 2101 recalls the stored value first and pays no attention to
Parameter links. If you want a Program to load with a Master Volume of 3, store it with
Master Volume set at 3. Setting the link at Min Value doesn't mean that the Program
automatically loads with that Min Value loaded.
• Press one of the ten Patch footswitches or move the Expression pedal to Link that
Parameter. The display reads:
Pressing the [1] function button re-assigns the function of the footswitch. The display
looks something like this:
Pressing [2] will leave everything as it was, aborting the procedure.
• Press the [MIDI] button to exit the Parameter Link mode.
Other Footswitch Functions: The footswitches on the Control One can be assigned to do sev-
eral functions. This is done through the Foot Controller menu in the Utilities section of the
2101. These functions include:
Program Up/Down: Footswitches in a Bank can be used to select the next or previous
Program available instead of some specific Program (exactly like the Program Up/Down
buttons function).
Bank Up/Down: Footswitches in a Bank can be used to select the next or previous Bank.
Many players set aside two footswitches in each Bank so that they can get around their
Banks more easily. The Bypass and Prg/Bank/tuner buttons can also be set up to func-
tion this way (see pg. 81 for more information).
List Up/Down: The 2101 allows you to program a song or performance list (see pg. 80).
After that list is created, the List Up/Down allow you to navigate through that list.
Toggle CC: This function allows you to send MIDI Continuous Controller (CC) infor-
mation out the MIDI port while the footswitch still maintains its ability to control a
Parameter directly. When assigned to a footswitch, CC values 0 (Off) or 127 (On) are
sent. CC numbers 0 through 127 are available.
GSP-2101 Artist Owner's Manual
Section 6 - The GSP-2101 and the Control One
¡Link:2 ™Min/Max
MVol MVol Links
to Int Exp Pedal
£Delete Link
Do you want to
re-assign foot
switch ?
¡Yes £No
¡Link:2 ™Min/Max
MVol MVol Links
to Foot Switch 9
£Delete Link
≤ ≥
≤ ≥
75