Troubleshooting; Precautions - Honeywell TE923W - Deluxe Weather Station User Manual

Troubleshooting

Q: "The display shows dashes "—-" for weather parameter(s)"
A: The display will show "- - -" when the wireless connection with the remote sensor is lost for
the following periods:
Thermo-Hygrometer: 15 minutes
UV Sensor: 30 minutes
Anemometer (Wind Sensor):15 minutes
Rain Gauge (Rain Sensor):30 minutes
Check or replace the batteries for the corresponding sensor. Then press and hold DOWN on the
main unit or handheld remote to enforce a search for all remote signals.
If this does not work, check the wireless transmission path from the corresponding weather
sensor to the main unit and change their locations if necessary.
Although wireless signals can pass through solid objects and walls, the weather sensor should
ideally be within the line of sight of the main unit.
The following may be the cause of reception problems:
• The remote weather sensor and a main unit are too far from each other.
• The signal shielding materials, such as metal surfaces, concrete walls or dense vegetation, are
in the path of transmission.
• There is interference from the wireless devices (such as cordless phones, radio headsets and
baby listening devices) and electronic appliances.
Q: "The weather readings on my weather station are different from the TV, radio or
official weather reports."
A: The weather data may vary considerably due to different environmental conditions and
placement of the weather sensors.
Check the placement tips included in this manual to site your weather sensors in the best
possible way.
Q: "The weather forecast is inaccurate."
A: The weather forecast predicts the weather for the next 12 to 24 hours, and does not reflect
current weather conditions.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here
are a few precautions:
• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts
and corrode the electronic circuits.
• Do not subject the product to excessive force, shock, dust, temperature, or humidity, which
may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.
• Do not tamper with the product's internal components. Doing so will invalidate the warranty
and may cause damage. The product contains no user-serviceable parts.
• Use only fresh batteries. Do not mix new and old batteries.
• Read the user's manual thoroughly before operating the product.
TE923W IM1(ENG) HONEYWELL R.pmd
35
35 4/11/08, 5:28 PM