Uv Mode; Clock And Alarm Mode; Manual Settings - Honeywell TE923W - Deluxe Weather Station User Manual

Understanding the Moon Phase Diagram
FULL

UV Mode

The current UV intensity is indicated by the numerical value and more intuitive display, by
categorizing it into the levels "LOW", "MED", HIGH", V. HIGH" and EXTREME. It is also
represented by a comfort icon that corresponds to different levels.
The main unit records the daily and weekly maximum UV intensity. Values may be displayed in
MED/h or UVI.
Accessing UV Mode
From the main unit: Press UP or DOWN until the UV icon
the handheld remote control: Press
Viewing UV Statistics
In UV Mode press the MEMORY button viewing either current UV intensity, daily Maximum UV
intensity with "DAILY MAX" displayed or weekly Maximum UV intensity with a "WEEKLY
MAX" displayed.
Resetting the UV Statistics Memory
In UV Mode, press and hold MEMORY to reset all UV statistics.
Setting Units for UV Display (MED/h or UVI)
In UV Mode, press and hold SET to convert units between MED/h and UVI.

Clock and Alarm Mode

Manual Settings

The main unit can be manually set to display the time, calendar or UTC time. There are three time
alarms available on the main unit:
(Pre-Al).
• If Weekday alarm is activated, it will sound at the set time and the alarm icon will flash
Mondays through Fridays.
• If Single day alarm is activated, it will sound at the set time and the alarm icon will flash only
for this specific day and will not activate on subsequent days.
• The Ice Warning Alarm is
before the weekday or single alarm, if channel 1 temperature falling to freezing and below.
Note: The snooze duration for listed alarms can also be programmed up to 15 minutes.
TE923W IM1(ENG) HONEYWELL R.pmd
LAST
NEW
.
Weekday alarm (W), Single alarm (S) and Ice Warning Alarm
activated at programmed time interval (from 15 to 90 minutes)
25
25
FIRST
on the display will flash. From
4/11/08, 5:28 PM