Honeywell TE923W - Deluxe Weather Station User Manual page 31

Accessing Temperature and Humidity Mode
Press main unit UP or DOWN until the IN icon on the upper right will flash.
From the remote control: Press .
Viewing Temperature and Humidity for each Channel
Static Display:
In Temperature and Humidity Mode, press the CHANNEL button to recall a different channel.
Channel Auto-Scan Display:
To enable automatic scan of the different channels, press and hold CHANNEL, until the icon
is displayed. Each valid channel will be alternately displayed with a 5 seconds delay.
Recalling of Temperature and Dew Point Displays
In Temperature and Humidity Mode, press the SET button to recall temperature and relative
humidity or dew point and relative humidity.
Set the Temperature in Celsius or Fahrenheit.
In Temperature and Humidity Mode, press and hold the SET button to toggle the temperature in
Celsius (ºC) or Fahrenheit (ºF).
Activating/Deactivating the Temperature Alerts
In Temperature and Humidity Mode, press the ALARM/CHART button to recall a current
temperature for the corresponding channel, the upper temperature alert with icon (if disabled,
displays OFF), or lower temperature alert with icon (if disabled, displays OFF).
Once the above alerts are displayed, press UP or DOWN to enable or disable the corresponding alert.
Programming the Temperature Alerts
• In the Temperature and Humidity Mode, press the ALARM/CHART button selecting the
desired alarm.
• Press and hold the ALARM/CHART button until the remote temperature and or icon
starts flashing.
• Adjust the temperature digits for the Temperature Alert using the UP or DOWN. Press and hold
either button for fast digits advance.
• Press the ALARM/CHART button to confirm selection and return to the temperature alert
selection screen.
Disabling Temperature Alarm(s)
In the Temperature & Humidity Mode, press the ALARM/CHART button to disable the alarm(s).
Viewing the Max/Min Channel Temperature and Humidity
In the Temperature & Humidity Mode, press the MEMORY button to recall a current temperature
and humidity, minimum temperature and humidity or maximum temperature and humidity at the
remote location.
Resetting the Remote Temperature and Humidity Memory
In the Temperature and Humidity Mode, press and hold the MEMORY button to clear memory
for all channels.
31
TE923W IM1(ENG) HONEYWELL R.pmd 31 4/11/08, 5:28 PM