Buttons And Controls - Honeywell TE923W - Deluxe Weather Station User Manual

To set the pressure & altitude units and program your altitude, use the handheld remote control or
main unit control panel:

Buttons and Controls

Most of the handheld remote control buttons are corresponding to the main unit controls.
To expose the main unit control buttons, press the OPEN button on the upper right corner of the
main unit and the controls' cover door will open.
Main unit and handheld remote control adequate buttons
- Selects the next available mode anti-clockwise
A.UP
B.DOWN
- Selects the next available mode clockwise
- Decreases parameters
- Rotates display for current mode
C. SET
- If depressed and hold, enters into the programming mode or changes
- Confirms set parameters
- Allows displaying the moon phase, UV, temperature, humidity, rainfall
D. MEMORY
- Allows displaying the sea-level pressure history
E. HISTORY
- Allows displaying the time alarms and alerts for the temperature, rainfall
F. ALARM/
- If depressed and hold, allows entering into the alarm/alert programming
CHART
- When depressed and hold in pressure and forecast mode, allows viewing
- Changes the temperature and humidity channel- Enables the temperature
G. CHANNEL
- Enables a backlight for 5 seconds- Snoozes the alarms
H. LIGHT/
SNOOZE
TE923W IM1(ENG) HONEYWELL R.pmd
G H
Increases parameters
parameter's units
and wind memory records
and wind.
mode
of the different bar charts
and humidity channel auto-scan mode
16
16
I
A
B
C
D
E
F
4/11/08, 5:26 PM