Troubleshooting; Specifications - Honeywell PCR426W User Manual

Weather forecaster with dual projection
Hide thumbs Also See for PCR426W:
Table of Contents

Advertisement

may scratch the plastic parts and corrode the electronic circuits.
· Do not subject the product to excessive force, shock, dust,
temperature, or humidity, which may result in malfunctions,
shorter lifespan, damaged batter ies, and damaged par ts.
· Do not tamper with the unit s internal components. Doing so will
invalidate the warranty and may cause damage. The unit
contains no user-serviceable parts.
· Use only fresh batteries. Do not mix new and old batteries.
· Read the user's manual thoroughly before operating the unit.

TROUBLESHOOTING

Check here before contacting customer service.
Issue
Symptom
Main unit
US Atomic Time
signal is not
received
Remote sensor
Cannot locate
remote sensor
Cannot change the
channel
Cannot change the
C° to F° and back
Data does not
match data on the
main unit
Solution
Place unit by the window and
keep it there overnight
Check batteries
Check location
Press and hold the main unit
DOWN (
) button to search
for the remote sensor signal
Press RESET after setting
the channel
Press RESET after setting
C/F
Initiate manual sensor search
(Press and hold DOWN (
button on the main unit)
21

SPECIFICATIONS

Main Unit
Time
12 hour display in hh: mm format
Date format: month day
User-selectable US Time Zone
Day of the week: User-selectable in three languages- English, Spanish or
French
Dual 4 minutes crescendo alarm with snooze
Ice Warning Pre-Alarm with programmable time inter vals
Weather
Indoor Temperature
Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F
Temperature resolution: 0.1°C/0.2°F
User-selectable (F° or C°) temperature display
Weather Forecast in six large graphic icons
EL backlight
Low battery indicator
Projection
Focus adjustment
180° projected image rotation and flip
Light sensor detects low light conditions (100 LUX and lower)
Remote Sensor
Remote Temperature
Proposed operating range with alkaline batteries:
-20.0°C to + 70.0°C/-4.0°F to + 158°F
Proposed operating range with lithium batteries:
-38.8°C to + 70.0°C/-38.0°F to +158°F
Temperature resolution: 0.1°C/0.2°F
Low battery indicator
RF Transmission Frequency: 433 MHz
Maximum number of remote sensors: 3 (one included)
RF transmission range: Maximum 100 feet (30 meters)
Temperature transmission cycle: approximately 45 seconds
Power
Main unit: 4 AA size (UM-3) 1.5V batteries (not included)
AC/DC adapter - 7.5 V (included)
Remote Sensor: 2 AA size (UM-3) 1.5V batteries (not included)
)
Dimensions
Main unit: 3.25(L) x 4.5(H) x 1.25(D) inches
Remote sensor: 2.37(L) x 4(H) x 1(D) inch
22
21

Advertisement

Table of Contents
loading

Table of Contents