Buttons And Controls - Honeywell TE923W User Manual

Buttons and Controls

Most of the handheld remote control buttons are corresponding to the main unit controls.
To expose the main unit control buttons, press the OPEN button on the upper right corner of the
main unit and the controls' cover door will open.
Main unit and handheld remote control adequate buttons
-Selects the next available mode anti-clockwise
A. UP
-Increases parameters
-Selects the next available mode clockwise
B. DOWN
-Decreases parameters
-Recalls all remote sensors signals when depressed and held for 5
seconds
-Rotates display for current mode
C. SET
-If depressed and held, enters into the programming mode or changes
parameter's units
-Confirms set parameters
D. MEMORY
-Allows displaying the moon phase, UV, temperature, humidity, rainfall
and wind memory records
E. HISTORY -Allows displaying the sea-level pressure history
-Allows displaying the time alarms and alerts for the temperature,
F,G. ALARM/CHART
rainfall and wind.
-If depressed and held, allows entering into the alarm/alert
programming mode
K L
18
N
M