Administration
Performing Diagnostic Tests
STEP 3
Cisco Small Business WRV210 Administration Guide
•
Times to Ping: Enter the number of times that you want to ping the device:
5, 10, 15, or Unlimited.
b. Click Start to Ping to start the test. The results of the test appear in a new
window.
•
Click Stop to stop the test.
•
Click Clear Log to clear the results.
•
Click Close to return to the Administration > Diagnostics page.
Traceroute Test:
a. In the IP or URL Address field, enter the IP or URL address of the network
device whose performance you wish to test.
b. Click Start to Traceroute to start the test. The results of the test appear in a new
window.
•
Click Stop to stop the test.
•
Click Clear Log to clear the results.
•
Click Close to return to the Administration > Diagnostics page.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
7
90