Configuring Quality of Service (QoS)
Configuring QoS Settings for Specified Ports
STEP 4
Cisco Small Business WRV210 Administration Guide
•
Ingress Rate: Choose the input data rate for a port. Packets exceeding this
rate are dropped. The rates can be 128kbps, 256kbps, 512kbps, 1Mbps,
2Mbps, 4Mbps, 8Mbps, 16Mbps, 32Mbps, Full (highest), or no rate control.
Full is the default.
•
Egress Rate: This setting lets the user choose the output data rate for a port.
Packets exceeding this rate are dropped. The rates can be 128kbps,
256kbps, 512kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps 16Mbps, 32Mbps, Full
(highest), or no rate control.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
6
79