Configuring the Wireless Network
Enabling Your Wireless Networks
STEP 3
Cisco Small Business WRV210 Administration Guide
-
Prevent from accessing: Choose this option to prevent the specified
computers from accessing your wireless network.
-
Permit to access: Choose this option to allow only the specified
computers to access your network.
•
MAC 1 to MAC 16: To specify the computers that are subject to your policy,
enter the MAC addresses. For a more convenient way to add MAC
addresses, click the Select MAC Address From Networked Computers link
below the table. When the Select MAC Address screen appears, select the
MAC Addresses that you want to add to the policy. Then click Apply. Click
Refresh if you want to refresh the screen. Click Close to return to the
previous screen.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
3
44