Performing Diagnostic Tests - Cisco WRV210 - Wireless-G VPN Router Administration Manual

Administration

Performing Diagnostic Tests

Performing Diagnostic Tests

STEP 1
STEP 2
Cisco Small Business WRV210 Administration Guide
Use the Administration > Diagnostics page to check the connections of your
network components.
Click Administration > Diagnostics in the navigation tree.
Perform a Ping Test or a Traceroute Test, as described below:
Ping Test: To verify connectivity between devices, a ping utility sends a request,
known as an ICMP echo-request packet, to the designated device. The device
responds with an echo reply. If there is no connectivity to the device, the request
times out.
a. Enter the following information:
• IP or URL Address: Enter the IP address or URL address of the network
device whose connection status you wish to test.
• Packet Size: Enter the size of the ping packets, in bytes. Acceptable values
are 32 to 56300.
7
89