Cisco WRV210 - Wireless-G VPN Router Administration Manual page 38

Configuring the Wireless Network
Enabling Your Wireless Networks
STEP 3
STEP 4
Cisco Small Business WRV210 Administration Guide
• G-Only: Choose this option if you have only 802. 1 1g devices in your
network.
• B-Only: Choose this option if you have only 802. 1 1b devices in your network.
• Disable: Choose this option if there are no 802. 1 1g or 802. 1 1b devices and
you do not wish to enable the wireless network.
In the SSID section, configure up to four wireless networks by entering the SSID
(network name) and other settings:
• Wireless Network Name (SSID): Enter a unique name for this wireless
network. Include up to 32 characters, using any of the characters on the
keyboard. For added security, you should change the default SSID1
(ciscosb) to a unique name.
• TX Rate Limitation: Choose the rate of data transmission. The Router
negotiates the connection speed between the Router and a wireless client
by this rate.
• SSID Broadcast: Enable this feature if you want to allow all wireless clients
within range to be able to detect this wireless network when they are
scanning the local area for available networks. Disable this feature if you do
not want to make the SSID known. When this feature is disabled, wireless
users can connect to your wireless network only if they know the SSID (and
provide the required security credentials).
• WMM: Check this box if you want to enable WMM (Wi-Fi Multimedia). This
feature prioritizes traffic for voice and media applications, such as Wi-Fi
phones.
• Wireless Channel: Select the appropriate channel from the drop-down
menu. All devices in your wireless network must transmit using the same
channel in order to function correctly. You may need to change the wireless
channel to improve the communication quality if there is interference from
nearby wireless access points.
• U-APSD: Select Enable it you want to use the Unscheduled Automatic
Power Save Delivery (U-APSD) feature to conserve power.
In the Wireless LAN Schedule, set up schedules when your the SSID2-SSID4
networks are available.
SSID 1 is the default and is always operational, unless the
NOTE
Mode
option is set to Disable.
3
Wireless Network
38