Cisco WRV210 - Wireless-G VPN Router Administration Manual page 58

Configuring the Firewall
Restricting Users' Access to the Internet
STEP 3
STEP 4
Cisco Small Business WRV210 Administration Guide
Enter the following settings for the chosen policy:
• Status: Click Enabled to enable the policy, or click Disabled to disable it.
Policies are disabled by default.
• Enter Policy Name: Type a name to identify the policy. After you save the
policy, this name will appear with the policy number in the Internet Access
Policy drop-down list.
• IP Address: Enter the IP address that will be affected by this policy.
• Days: Check the box for each day when the policy is enforced. Uncheck the
box for each day when the policy is not enforced.
• Time: Use the drop-down lists to set the range of times when the policy is
enforced. In the following example, the network is enabled from 8 a.m. to
5 p.m., Monday through Friday and is unavailable on Saturday and Sunday.
• Protocol: Specify the protocol that this policy affects. The choices are TCP,
UDP, All.
• Port: If this policy applies to traffic through a specific port, enter the port
number. Otherwise, leave 0 in the field.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
4
58