Front Panel - Cisco WRV210 - Wireless-G VPN Router Administration Manual

Introduction
Product Overview
Cisco Small Business WRV210 Administration Guide
Wireless networking in business environments requires additional flexibility. The
WRV210 has the capability to expand or reduce the area of your wireless network.
There is support for Wireless Distribution System (WDS), which allows the
wireless coverage to be expanded without wires through wireless bridging
between it and select Cisco Small Business stand-alone access points. That,
along with the ability to increase or decrease the RF output power, allows for
optimal wireless coverage.

Front Panel

POWER—(Green) The Power LED lights up when the Router is powered on.
DMZ—(Green) The DMZ LED lights up when the Router has an available DMZ port.
If the LED is flashing, the Router is sending or receiving data over the DMZ port.
INTERNET—(Green) The Internet LED lights up when the Router is connected to
your cable or DSL modem. If the LED is flashing, the Router is sending or receiving
data over the Internet port.
WIRELESS—(Green) The Wireless LED lights up whenever there is a successful
wireless connection. If the LED is flashing, the Router is actively sending or
receiving data over the wireless network.
1-4 (ETHERNET)—(Green) These four LEDs correspond to the four Ethernet ports
of the Router. If the LED is continuously lit, the Router is connected to a device
through the corresponding port (1, 2, 3, or 4). If the LED is flashing, the Router is
actively sending or receiving data over that port.
1
7