Cisco WRV210 - Wireless-G VPN Router Administration Manual page 83

Administration
Managing Access and Configuring Other Management Options
STEP 1
STEP 2
STEP 3
Cisco Small Business WRV210 Administration Guide
Click Administration > Management in the navigation tree.
In the Local Router Access section, configure the following settings:
• Use HTTPS: To use SSL encryption, select Enabled. After HTTPS is
enabled, http requests to the Router's LAN IP are redirected to HTTPS.
• Allow Wireless Web Access: Click Enabled to allow access through a
wireless connection, or click Disabled to prevent access through a wireless
connection. This feature is disabled by default.
In the Remote Router Access section, configure the following settings:
• Remote Management: Click Enabled to allow access to manage the
Router from a remote location, via the Internet. Click Disabled to disable this
feature.
• Use HTTPS: Click Enabled to use the SSL encryption, or click Disabled to
disable this feature.
• Remote Upgrade: If you enabled Remote Management, click Enabled to
allow access to upgrade the Router remotely from outside the local
network. Otherwise, keep the default setting, Disabled. This option is
available only if the Remote Management feature enabled.
• Allow Remote IP Address: If you enabled Remote Management, you can
allow access from any IP address, from a single IP address, or from a range
of IP addresses. Choose one of the following options:
- To allow remote access from any site: Click Any IP Address.
- To allow access from a single IP address: Click the radio button next to
the first text box, and then enter the IP address in the text boxes. Ignore
the final text box after the ~ symbol.
- To allow access from a range of IP addresses: Click the radio button
next to the first text box. Enter the first IP address in the first four text
boxes, and then enter the final octet of the final IP address in the text box
next to the ~ symbol. The following example illustrates a range from
209. 1 65.200.225 to 209. 1 65.200.230.
7
83