Boot Menu - H3C S5500-28C-EI Installation Manual

Installation Manual
H3C S5500-EI Series Ethernet Switches
Note:
The loading process of the Boot ROM software is the same as that of the host software,
except that during the Boot ROM loading process, you must select different digits after
entering the Boot Menu and the system gives somewhat different prompts. The
following text mainly describes the Boot ROM loading process.

5.2.1 Boot Menu

Starting......
Press Ctrl-B to enter Boot Menu... 0
Press Ctrl+B. The system displays:
Password :
Note:
To enter the Boot Menu, you must press Ctrl+B within two seconds after the
information "Press Ctrl-B to enter Boot Menu..." appears. Otherwise, the system starts
to decompress the program; and if you want to enter the Boot Menu at this time, you will
have to restart the switch.
Input the correct Boot ROM password (by default, no password is set on the switch).
The system enters the Boot Menu:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
***********************************************************
*
* H3C S5500-28F-EI BOOTROM, Version 205
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
Creation date
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size
Mac Address
BOOT MENU
Chapter 5 Boot ROM and Host Software Loading
: May 28 2007, 15:36:08
: 256MB
: 00e0fc005502
5-2
*
*
*