S5500-28C-Ei-Dc; Appearance - H3C S5500-28C-EI Installation Manual

Installation Manual
H3C S5500-EI Series Ethernet Switches
LED
SFP port status
LED (100 Mbps)

1.3 S5500-28C-EI-DC

1.3.1 Appearance

The S5500-28C-EI-DC provides twenty-four auto-sensing 10/100/1000BASE-T
Ethernet ports, four 1000Base-X SFP ports, and one console port on the front panel,
and one –48 VDC power socket, one RPS port, and two extended module slots on the
rear panel. Figure 1-4 shows the appearance of the S5500-28C-EI-DC.
Figure 1-4 Appearance of the S5500-28C-EI-DC
Mark Status
Speed
—
Duplex
1-7
Chapter 1 Product Overview
A 100 Mbps link is
present. When data is
Yellow being received or sent,
the LED flashes at a
high frequency.
Flashing The
yellow (3 Hz) POST.
OFF No link is present.
The port operates in the
full duplex mode. When
Green data is being received or
sent, the LED flashes at
a high frequency.
Flashing
The port fails the POST.
yellow (3 Hz)
OFF No link is present.
Description
port failed the