Synchronizing The Positions Of The Pen Tip And Pointer - Wacom DTI-520 User Manual

Synchronizing the Positions of the Pen Tip and Pointer

Make the necessary adjustments so that when the pen nib is brought near the LCD screen, the
pointer displays properly in the area where the pen nib is placed (parallactic adjusting).
* When using an analog RGB input type of LCD pen tablet, please refer to "Blurring and Protrusion of the
Picture from the LCD Panel" on P. 14 and make any necessary adjustments to the screen.
* When using multiple tablets, see page 24.
1
Click on Calibrate... and the screen
used for making adjustments will
appear.
2
Click in the middle of the cross mark in
the upper left-hand corner of the screen
while sitting in your normal seating position
with the pen nib and the cross mark will
move to the bottom right-hand side of the
screen.
3
Click again in the middle of the
c ro s s m a r k t h a t i s n o w i n t h e
bottom right-hand corner of the
screen while sitting in your normal
seating position and the cross
mark will disappear. The process
of synchronizing positions is now
complete.
Click on the OK button in the lower part
of the screen to close the screen.
UM-0314(A)_EN.indd 23

2007/11/12 16:53:19